Освещение & Интенсивность света

Дом Освещение & Интенсивность света

Освещение & Интенсивность света

Дом / Оптические приложения / Освещение & Интенсивность света

Оптические приложения / Освещение & Интенсивность света

Give light a precise direction

Lighting optics turn a source into a defined distribution. A useful project brief connects the emitter, optical surfaces and mounting arrangement with the light the application needs. Start with the beam pattern or illuminated region, then set the conditions that will make sample evaluation meaningful.

Обсудите ваш проект >Explore the application
Oval clear optical component with a central circular feature and two side mounting features.
Lens geometry for source-to-optic alignment
01Beam shaping02Light-guide uniformity03Source & array alignment
Four translucent white domed optical covers attached to a central molding runner.
Domed lens-cover forms

Beam shaping

Begin with the source and the target

An illumination lens should be reviewed with the source it is intended to control. Provide emitter dimensions, emission data and source-to-optic spacing, then define the target plane or angular distribution. Include the mounting features that maintain this relationship in the finished assembly. Beam width, output distribution and acceptable stray light need agreed measurement conditions so the desired result can guide the component and tooling review. Review the operating temperature and material data alongside the source so the optical assumptions match the proposed installation.

  • Source emission data, emitting area and optical spacing
  • Target plane, angular distribution and measurement distance
  • Beam profile, stray-light limits and mounting datums

Световоды

Define how the illuminated surface should look

For a light guide, specify where light enters, how it travels and where it should emerge. Mark the visible region and any areas excluded from evaluation. An appearance requirement needs defined viewing directions and luminance measurements; lighting a separate surface calls for a specified target and illuminance assessment. Include source drive, housing and alignment in the test setup so sample comparisons stay consistent. For a molded guide, include surface-detail inspection at agreed positions and identify permitted gate and handling locations.

  • Input surfaces, source position and visible output region
  • Viewing geometry or target-plane measurement grid
  • Source drive, housing configuration and uniformity criteria
Clear circular ring carrying repeated small optical features around its circumference.
Annular optical array

Optical arrays

Align every element in the array

Repeated optical features need a common reference with the emitter layout. Define each element’s position and orientation together with the array center, seating plane and rotational reference. Review the whole component for molding and assembly rather than assessing one repeated feature in isolation. Where practical, examine individual source positions before measuring the combined output so local alignment issues can be distinguished from the overall distribution. Agree trial-part checks for dimensions, surface condition and light distribution before the component moves to the proposed production scope.

  • Emitter layout and optical element coordinates
  • Common seating plane, center and angular orientation
  • Individual-position checks and combined-output acceptance

Подготовка проекта

Представьте эти детали на обзор проекта

Define the light result and the conditions used to measure it. Keep source, материал, housing and fixture information consistent through tooling review and trial evaluation.

  1. Optical model and source emission data with operating conditions
  2. Required beam pattern, illuminated region or output profile
  3. Source spacing, housing geometry and alignment references
  4. Материал, temperature exposure and surface requirements
  5. Measurement setup, acceptance criteria, количество и график
  6. Molding restrictions, detailed surface features and trial-part inspection requirements

Начать техническую дискуссию

Start with the light you need

Send SILVER OPTICS the source data, component geometry and target distribution. These inputs connect optical design, tooling and sample evaluation in one project discussion.

Discuss lighting optics >