Потребительская электроника

Дом Потребительская электроника

Потребительская электроника

Дом / Оптические приложения / Потребительская электроника

Оптические приложения / Потребительская электроника

Оптические характеристики в ограниченных пространствах

Компактные изделия размещают оптические поверхности близко к датчикам, излучатели, дисплеи и механические элементы. Полезная конструкция балансирует световой путь и доступное пространство для сборки и производства. Рассмотрите оптическую функцию, подробности о материале и креплении вместе, относится ли компонент к носимому устройству, портативному устройству или подсвеченному интерфейсу.

Обсудите ваш проект >Explore the application
Черно-белые очки, лежащие на отражающей поверхности.
Ссылочный форм-фактор очков
01Компактные оптические пути02Носимое устройство & оптика дисплея03Световоды & интерфейсы
Четыре маленьких прозрачных прямоугольных оптических покрытия на текстурированной синей поверхности.
Малые геометрии оптических покрытий

Компактные сборки

Защитите оптический путь внутри корпуса

Начните с используемого объема и поверхностей, которые должны оставаться оптически активными. Определите положение датчика или излучателя, the clear aperture and the interfaces that locate the component. Small packaging changes can alter alignment or introduce unwanted contact with an optical surface. Review the complete assembly stack alongside the part model so mechanical fit and optical function are assessed on the same basis. For molded designs, identify thickness transitions and allowable process marks before the optical envelope and tooling requirements are finalized.

  • Available envelope, source or sensor location and optical path
  • Чистая апертура, assembly datums and interface tolerances
  • Keep-out areas for contact, adhesive, gates and ejector marks
Six clear circular lenses joined by thin sprues around a central hub on a blue surface.
Molded lens family connected by runners

Wearables & displays

Define the viewing experience in measurable terms

For wearable or display-related optics, translate the intended viewing experience into a defined optical brief. State the viewing region, image requirements and space available, with an optical prescription where one has been developed. Candidate lens forms, including structured surfaces, require review against the material and manufacturing route. Acceptance should use agreed viewing and measurement conditions rather than a visual impression of an isolated component. Confirm the proposed production and finishing scope against the individual design rather than assuming a universal process or capacity.

  • Область просмотра, optical path and component envelope
  • Image-quality, transmission and surface requirements
  • Proposed surface geometry and defined evaluation conditions

Illuminated interfaces

Make indicators and light guides part of the design

Illuminated interfaces need a controlled relationship between the light source, guide and visible surface. Specify where light enters and where the user should see it, then define the desired distribution and viewing directions. Include the housing and any masking features in the review. Compare samples with consistent source drive and alignment so brightness variation can be traced to the component, assembly or test setup. Check the separated, finished component in the intended assembly and define sample approval before moving into production.

  • Emitter data, input surfaces and source spacing
  • Visible region, luminance targets and viewing geometry
  • Housing, masking features and repeatable assembly conditions

Подготовка проекта

Представьте эти детали на обзор проекта

Bring the optical and mechanical teams into the same review. Include molding restrictions and the acceptance criteria for separated, finished samples.

  1. Current component model and surrounding assembly geometry
  2. Sensor, emitter or display information and required optical result
  3. Material preferences, finish and coating requirements
  4. Permitted molding marks and critical assembly references
  5. Trial and production quantities, schedule and sample approval criteria
  6. Material and part identification, finished-sample inspection and production release requirements

Начать техническую дискуссию

Make the next design review more useful

Send SILVER OPTICS the component model, optical targets and assembly context. A clear brief helps connect tooling and molding decisions to the product you are developing.

Discuss consumer optics >