Électronique grand public

Accueil Électronique grand public RFQ pour séparateur de faisceau: Définir le ratio aux conditions de fonctionnement

RFQ pour séparateur de faisceau: Définir le ratio aux conditions de fonctionnement

Enquête
  • Description

A 70/30 marking does not tell a supplier which port should receive more power or under what conditions to verify it. Define the reflected and transmitted paths in a sketch, then specify how to measure the ratio.

Label the Beam Paths

Mark the input, the transmitted port, and the reflected port. Identify the input face, nominal incidence geometry, and effective beam diameter. For a plate or cube substitution, ask for a revised interface drawing before accepting it. Mechanical fit alone does not establish an equivalent beam path.

Define the Measurement

Specify wavelength or band and input polarization. Decide whether acceptance is evaluated at a single condition or across a range. If collected power matters, state minimum power at the ports or define the loss budget. A ratio between outputs does not establish total throughput.

Liste de contrôle RFQ

  • Port and input-face diagram
  • Wavelength, incidence geometry, and polarization
  • Ratio convention, tolerance, and throughput requirements

Any cosmetic acceptance requirement should separately explain how to inspect for scratches and digs.

Référence technique: edmundoptics.com.

CATÉGORIE ET ÉTIQUETTES:
Électronique grand public

ENVOYER UNE DEMANDE

Nom *

Email *

Téléphone

Message

Vérification *     + = ?

Produits connexes