WhatsApp: +86 13530516428 Tel: 0755-23089686     sales@silveroptics.net

Industrial Vision

Home Industrial Vision

Industrial Vision

Home / Optical Applications / Industrial Vision

Optical Applications / Industrial Vision

Make the inspection task the optical specification

Industrial vision begins with a practical question: what must the system detect, measure or distinguish? Translate that task into a defined optical path, then connect the component to the camera, illumination and installation. A clear specification makes material, geometry, coating and acceptance decisions easier to review.

Discuss your project >Explore the application
Long clear rectangular optical component with shaped ends on a textured blue surface.
Linear light-guide geometry
01Inspection & measurement02Illumination & contrast03Mounting & environment
Rectangular transparent component with a fine grid pattern, reflected on a dark surface.
Patterned optical surface

Inspection geometry

Start with the feature that matters

Define the object and the inspection result before selecting a lens component. Include the feature size, field of view, working distance and sensor information, together with any motion or depth variation that affects the task. State the required resolution, distortion or measurement repeatability with a defined test method. The component specification should support these system needs without treating a lens photograph as evidence of inspection performance. Use a defined object or reference sample and document the camera settings needed to reproduce the acceptance test.

  • Object features, sensor information and field of view
  • Working distance, depth variation and motion conditions
  • Resolution, distortion and measurement acceptance criteria
Rectangular clear plate with four rows of five repeated lens-shaped features.
Molded lens array

Illumination & filters

Review illumination and spectral control together

Image contrast depends on the relationship between the object, light source and viewing geometry. Specify the illumination spectrum and direction, then identify the role of any filter, window or coating in the path. For wavelength-selective components, include angle of incidence and polarization requirements where relevant. Evaluate the proposed specification against the actual camera and illumination arrangement, including ambient light conditions that could affect the inspection. Include the cleaning and contamination conditions relevant to exposed optical surfaces when preparing the material and coating requirements.

  • Source spectrum, illumination geometry and ambient conditions
  • Transmission or reflection targets and incidence angle
  • Filter, window and coating requirements in the optical path

System integration

Keep optical and mechanical references connected

A vision component needs a defined position in the installed system. Link optical surfaces to the seating and locating features used by the mount, and show the clear aperture relative to those references. Include assembly clearance and any loading conditions that matter. When a component is checked in a fixture, record the support and alignment conditions so the result can be related to the production installation. Specify temperature, vibration and cleaning exposure, with any required post-exposure checks included in the repeat-order acceptance plan.

  • Optical-axis relationship to the mechanical datums
  • Clear aperture, seating features and assembly clearance
  • Inspection fixture, support points and alignment method

Project preparation

Bring these details to the project review

Include the factory-floor conditions as well as the initial optical result. A repeatable acceptance plan should reflect the intended camera, illumination and mounting arrangement.

  1. Inspection task, object features and required measurement result
  2. Camera or sensor data, wavelength range and working geometry
  3. Component drawing, mount interfaces and clear aperture
  4. Illumination, coating and installation requirements
  5. Acceptance method, quantities, schedule and required records
  6. Temperature, vibration, dust, cleaning conditions and any post-exposure checks

Start a technical conversation

Bring the inspection challenge into the brief

Share the optical task and installation conditions with SILVER OPTICS. Include the camera, illumination and mounting context needed to review the individual component.

Discuss industrial vision optics >